Engineered with drivability and performance in mind, the TeraFlex JK Base 3†Lift Kit w/ 9550 VSS Shock Absorbers includes the basic pieces needed to lift your JK to tackle some serious trails.
Not only do TeraFlex kits drive straight, but they will crawl over anything to get you there and back!
FITS:
JK Wrangler (2-door)
SPECS:
LIFT HEIGHT: 3â€
MAX TIRE DIAMETER: 35â€
INCLUDES:
3†lift coil springs
Bump stops
Front sway bar disconnects
Rear track bar bracket
Rear sway bar links
TeraFlex 9550 VSS shocks – set of 4
All necessary hardware
And more
NOTES:
Requires aftermarket wheels w/ 4.5†backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels.
2012-2018 JK/JKU models require Exhaust Spacers (# 2610000) or other exhaust modification for proper driveshaft clearance.
Driveshaft modifications are recommended with this suspension system. See the TeraFlex Rzeppa High Angle CV Kit (# 1744014).
2007-2011 JK/JKU models will require Extended Length Front Brake Lines (# 4353300).
Requires 2.5-4†Adjustable Alpine Flexarms (# 1415610) or 3-6†Adjustable Alpine Long Flexarms (# 1315010) and HD Forged Adjustable Front Track Bar (# 1753418) to set correct suspension geometry including caster angle, pinion angle, roll center, & load tuning during re-alignment after installation. Proper suspension geometry ensures all stability controls function within factory parameters.
INSTALL TIME: 5 Hours
