The Rock Krawler JK 3.5 Ultimate Adventure Mid Arm System was designed for those who want an easy bolt-in installation, excellent on-road ride and the durability and the off-road performance you expect from Rock Krawler Suspension. This kit features Rock Krawler’s proven, service free control arm joints. These joints are the industry leader in service free control arm joints using innovative technology to provide the best possible ride in your Wrangler. The Adventure Series fixed lower control arms offer a total of 70 degrees of misalignment that greatly reduces the bind inherent in JK factory lowers, while high misalignment adjustable upper control arms let you precision tune your JK’s caster in the front and pinion angle in the rear. Rock Krawler’s industry leading triple rate coils give you 3.5 inches of lift to clear up to 40-inch tires, depending on model, and improve the on-road ride over the factory linear rate springs. All Rock Krawler JK systems include correction pads that help minimize the spring bow inherent in the factory set up. The provided track bar geometry corrections, both front and rear, lets you perfectly center the axles so there is no compromise in handling.
System Benefits:
Complete Bolt in System
Excellent Highway Ride and Handling
Greatly Improved Off-Road Ability
High Clearance Lower Control Arms Front and Rear
In Vehicle Adjustable Front Upper Arms
Triple Rate Coil Springs
Rear Extended Sway Bar Links
33" or 35" Tires (OEM Fenders)
37" Tires (Flat Fenders)
Abuse Proof Lifetime Warranty on All Hard Parts
Upgradeable to any other Rock Krawler System
System Includes:
(4) Triple rate coil springs
(1) Adjustable 1.5 inch solid alloy steel front track bar
(4) High clearance lower control arms made of 1.625" solid alloy steel
(2) High misalignment double adjustable front upper control arms
(2) High misalignment double adjustable rear upper control arms
(2) Rear extended sway bar links
(1) Bolt-on rear track bar relocation bracket
(2) Front brake line relocation bracket
(2) Rear brake line relocation bracket
(2) Rear coil spring degree wedges
*includes all Hardware and detailed Instructions.
General Notes:
*All lift heights based on Rubicon models for standard style build (i.e., front bumper and winch, rear bumper and full-size spare).
*If building with a spare delete, we recommend dropping 1” in coil lift height for the rear.
*If building an overland or heavily upfitted build in the back, we recommend upsizing 1” in coil lift height for the rear
*We typically recommend 4.5" of back spacing on rims for 33" and 35" tall tire
*We typically recommend 3.5" of back spacing on rims for 37" tall tires
*For 2012 and newer models an aftermarket front driveshaft with 2" O.D. steel tubing is recommended, but not required
